Beacon Receiver manufacturer, Satellite Systems Corporation, is a leading manufacturer of:
Frequency Converters, Antenna Positioning Systems, RF Switches, Redundancy Switches & other Beacon Tracking Receiver products.
Give us a call (757) 463-3553
Beacon Receiver manufacturer, Satellite Systems Corporation, was founded in 1980. We have over 30 years experience in the satellite industry in satellite earth station installation, integration, and equipment manufacturing. Currently, we manufacture a full suite of Beacon Tracking Receivers, Frequency Converters, RF & Redundancy Switch products, Antenna Control systems and Remote Carrier Monitor products and other satcom products used throughout the industry.

Beacon Receiver Monitor & Control Software

Alarm triggered email notification for loss of signal, change in AFC, and signal strength.
Large signal strength read out; easy to remotely control or monitor your beacon receiver.
Additional logging feature allows for tab delimited file that can be imported into your favorite spreadsheet program.
Log files can be automatically saved and restarted on a daily basis and pulled up later for review of btr, tracking and or uplink power performance.
Strip charting utility allows for recording of signal strength, AFC and temp. Events are recorded and presented on time based event chart.

Beacon Receiver Models 3430

A beacon tracking receiver for antenna step tracking and automatic uplink power control
top
Beacon Tracking Receiver Models 3430
Beacon Receiver model 3430-I - I Band Beacon Tracking Receiver: The Model 3430-I beacon receiver is a fully frequency agile satellite receiver designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier. Frequency selection on 10 kHz steps may be accomplished from the front panel or remote control. Pre-detection noise bandwidth of 50 kHz facilitates accurate tracking at very low C/N levels.

Beacon Receiver model 3430-IF - IF Band Beacon Tracking Receiver: The Model 3430-IF beacon receiver is a fully frequency agile satellite receiver designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier. Frequency selection on 10 kHz steps may be accomplished from the front panel or remote control. Pre-detection noise bandwidth of 50 kHz facilitates accurate tracking at very low C/N levels.

Beacon Receiver model 3430-L - L Band Beacon Tracking Receiver: The Model 3430-L Version 4 beacon receiver is the latest release of our reliable series of 3430 Beacon Receivers. With Version 4 firmware we now offer the full L-band range of 930 to 2300 MHz, Digital Level reference setting, Ethernet connectivity with control interface, and power up temperature compensation for rapid signal acquisition. Frequency selection on 10 kHz steps may be accomplished from the front panel or via remote control. Pre-detection noise bandwidth of 50 kHz (or factory option of 25 kHz) facilitates accurate tracking at very low C/N levels.

Beacon Receiver model 3430-S - S Band Beacon Tracking Receiver: The Model 3430-S beacon receiver is a fully frequency agile satellite receiver designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier. Frequency selection on 10 kHz steps may be accomplished from the front panel. Pre-detection noise bandwidth of 50 kHz facilitates accurate tracking at very low C/N levels.

Beacon Receiver model 3430-CE - C Band Beacon Tracking Receiver: The Models 3430-CE beacon receiver is fully frequency agile satellite receivers designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier. Frequency selection on 10 kHz steps may be accomplished from the front panel or remote control. Pre-detection noise bandwidth of 50 kHz facilitates accurate tracking at very low C/N levels.

Beacon Receiver model 3430-CH - C Band Beacon Tracking Receiver: The Models 3430-CH beacon receiver is fully frequency agile satellite receivers designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier. Frequency selection on 10 kHz steps may be accomplished from the front panel or remote control. Pre-detection noise bandwidth of 50 kHz facilitates accurate tracking at very low C/N levels.

Beacon Receiver model 3430-X - X Band Beacon Tracking Receiver: The Model 3430-X beacon receiver is a fully frequency agile satellite receiver designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier. Frequency selection on 10 kHz steps may be accomplished from the front panel or remote control. Pre-detection noise bandwidth of 50 kHz facilitates accurate tracking at very low C/N levels.

Beacon Receiver model 3430-KuA - The Models 3430-KuA, KuB, KuC, KuD, KuE and Kw beacon receivers are fully frequency agile satellite receivers designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier. Frequency selection on 10 kHz steps may be accomplished from the front panel or remote control. Pre-detection noise bandwidth of 50 kHz facilitates accurate tracking at very low C/N levels.

Beacon Receiver model 3430-KuB - The Models 3430-KuA, KuB, KuC, KuD, KuE and Kw beacon receivers are fully frequency agile satellite receivers designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier. Frequency selection on 10 kHz steps may be accomplished from the front panel or remote control. Pre-detection noise bandwidth of 50 kHz facilitates accurate tracking at very low C/N levels.

Beacon Receiver model 3430-KuC - The Models 3430-KuA, KuB, KuC, KuD, KuE and Kw beacon receivers are fully frequency agile satellite receivers designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier. Frequency selection on 10 kHz steps may be accomplished from the front panel or remote control. Pre-detection noise bandwidth of 50 kHz facilitates accurate tracking at very low C/N levels.

Beacon Receiver model 3430-KuD - The Models 3430-KuA, KuB, KuC, KuD, KuE and Kw beacon receivers are fully frequency agile satellite receivers designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier. Frequency selection on 10 kHz steps may be accomplished from the front panel or remote control. Pre-detection noise bandwidth of 50 kHz facilitates accurate tracking at very low C/N levels.

Beacon Receiver model 3430-KuE - The Models 3430-KuA, KuB, KuC, KuD, KuE and Kw beacon receivers are fully frequency agile satellite receivers designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier. Frequency selection on 10 kHz steps may be accomplished from the front panel or remote control. Pre-detection noise bandwidth of 50 kHz facilitates accurate tracking at very low C/N levels.

Beacon Receiver model 3430-KW - The Models 3430-KuA, KuB, KuC, KuD, KuE and Kw beacon receivers are fully frequency agile satellite receivers designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier. Frequency selection on 10 kHz steps may be accomplished from the front panel or remote control. Pre-detection noise bandwidth of 50 kHz facilitates accurate tracking at very low C/N levels.

Beacon Receiver Models 3434

A beacon tracking receiver for antenna step tracking and automatic uplink power control
top
Beacon Tracking Receiver Models 3434
Beacon Receiver model 3434-L - The Model 3434-L Version 4 beacon receiver is the latest release of our reliable series of 3434 Beacon Receivers. With Version 4 firmware we now offer the full L-band range of 930 to 2300 MHz, Digital Level reference setting, Ethernet connectivity with M&C control interface, and power up temperature compensation for rapid signal acquisition. The 3434 series now offers our proprietary Accu-trac search and acquire AFC feature with several search bandwidths up to ± 800 kHz. Frequency selection on 10 kHz steps may be accomplished from the front panel or via remote control. Pre-detection noise bandwidth of 50 kHz (or factory option of 25 kHz) facilitates accurate tracking at very low C/N levels for use with either CW or BPSK carriers.

Beacon Receiver model 3434-IF - The Model 3434-IF Version 4 beacon receiver is the latest release of our reliable series of 3434 Beacon Receivers. The Model 3430-IF beacon receiver features an input of 50 - 200 MHz, Digital Level reference setting, Ethernet connectivity with M&C control interface, and power up temperature compensation for rapid signal acquisition. The 3434 series now offers our proprietary Accu-trac search and acquire AFC feature with several search bandwidths up to ± 800 kHz. Frequency selection on 10 kHz steps may be accomplished from the front panel or via remote control. Pre-detection noise bandwidth of 50 kHz (or factory option of 25 kHz) facilitates accurate tracking at very low C/N levels for use with either CW or BPSK carriers.

Beacon Receiver model 3434-CH - The Model 3434-CH Version 4 beacon receiver is the latest release of our reliable series of 3434 Beacon Receivers. With Version 4 firmware the Model 3434-CH beacon receiver has an input of 3.4 - 4.2 GHz****, Digital Level reference setting, Ethernet connectivity with M&C control interface, and power up temperature compensation for rapid signal acquisition. The 3434 series now offers our proprietary Accu-trac search and acquire AFC feature with several search bandwidths up to ±800 kHz. Frequency selection on 10 kHz steps may be accomplished from the front panel or via remote control. Pre detection noise bandwidth of 50 kHz (or factory option of 25 kHz) facilitates accurate tracking at very low C/N levels for use with either CW or BPSK carriers.

Beacon Receiver model 3434-KuD - The Model 3434-KuD Version 4 beacon receiver is the latest release of our reliable series of 3434 Beacon Receivers. With Version 4 firmware the Model 3434-KuD beacon receiver has an input of 10.7 - 11.7 GHz****, Digital Level reference setting, Ethernet connectivity with M&C control interface, and power up temperature compensation for rapid signal acquisition. The 3434 series now offers our proprietary Accu-trac search and acquire AFC feature with several search bandwidths up to ±800 kHz. Frequency selection on 10 kHz steps may be accomplished from the front panel or via remote control. Pre-detection noise bandwidth of 50 kHz (or factory option of 25 kHz) facilitates accurate tracking at very low C/N levels for use with either CW or BPSK carriers.

Beacon Receiver model 3434-KuE - The Model 3434-KuE Version 4 beacon receiver is the latest release of our reliable series of 3434 Beacon Receivers. With Version 4 firmware the Model 3434-KuE beacon receiver has an input of 11.7 - 12.75 GHz****, Digital Level reference setting, Ethernet connectivity with M&C control interface, and power up temperature compensation for rapid signal acquisition. The 3434 series now offers our proprietary Accu-trac search and acquire AFC feature with several search bandwidths up to ±800 kHz. Frequency selection on 10 kHz steps may be accomplished from the front panel or via remote control. Pre-detection noise bandwidth of 50 kHz (or factory option of 25 kHz) facilitates accurate tracking at very low C/N levels for use with either CW or BPSK carriers.

Beacon Receiver model 3434-Ka3 - The Model 3434-Ka3 Version 4 beacon receiver is the latest release of our reliable series of 3434 Beacon Receivers. With Version 4 firmware the Model 3434-Ka3 beacon receiver has an input of 20.2 to 21.2 GHz****, Digital Level reference setting, Ethernet connectivity with M&C control interface, and power up temperature compensation for rapid signal acquisition. The 3434 series now offers our proprietary Accu-trac search and acquire AFC feature with several search bandwidths up to ±800 kHz. Frequency selection on 10 kHz steps may be accomplished from the front panel or via remote control. Pre-detection noise bandwidth of 50 kHz (or factory option of 25 kHz) facilitates accurate tracking at very low C/N levels for use with either CW or BPSK carriers.